Ready Stock of Furukawa Jumbo Drill or JTH2100A in Indonesia with status is a New Old Stock unit which is manufactured at 2018 Japan. We had been as being of Distributor Furukawa since 2002 until 2021 and we are local company in Indonesia who has been establish at 1978 which has specialize in drilling and crushing equipment. This advertise will still be active until the last stock of Jumbo Drill we have would be sold immediately.
Jumbo Drill or Drilling Jumbo that we have, its JTH2100A model from Furukawa Rock Drill as be manufacturer in Japan. JTH2100 has 1 cage and 2 boom for drill with drill rod is 12 feet long and drill bit is 1.5 – 2 inch with cummins engine. You can refer to our JTH2100A Jumbo Drill specification below :
JTH2100 Jumbo Drill specification :
Model JTH2100A
Main unit
Number of booms 2 units
Drifter type HD210Ⅱ
Overall weight 21.0 ton
Overall length 11,220 mm
Overall width 2,160 mm
Overall height 2,880 mm
Parallel drilling range W x H 9.6 m x 6.6 m
Operation decks Charging cage ( 1 unit )
Grade ability 15 degrees
Guide shell
Model GH833-33-Ⅱ or GH833-27
Overall length 5,263 mm or 4,653 mm
Effective feed length 3,340 mm or 2,740 mm
Boom
Model JE332-Mark4
Overall length 2,700 mm / 4,100 mm
Boom lift angle (up/down) 60 / 30 degrees
Boom swing angle (inner/outer) 25 / 45 degrees
Boom extension length 1,400 mm Power unit
Guide rotary angle 360 degrees Output x number of unit 55 kW x 2 units
Guide tilt angle (up/down) 30 / 60 degrees Voltage 400V / 440V
Guide swing angle (up/down) 45 / 45 degrees Engine
Guide slide length 1,350 mm Maker CUMMINS
Traveling Model QSB4.5-3B
Traveling system Engine Output (SAE) 119.3 kW / 2,500 min-1
Traveling speed 0 ～ 8 km/h Water consumption rate 130 liters / min
Jumbo Drill JTH2100A Ready Stock in Indonesia
We sell our JTH2100A Jumbo Drill as it is, The unit can normally run when turn on without any disfunction, feel free if you want take a look and check our unit. we are open to be discussed for term of selling condition because unit has to be sold as soon as possible through our contact in photo above. Thank you for your cooperation.